Page 5 of 20
18719901 Rev G
®
Layout the left and right stretcher assembly and the center connector
with the dovetails pointing down. Loosely install the center connector to
the left and right stretcher using two (2) 1/4-20 type F flat head screws
with phillips #3 drive...do not tighten. (Left and right is determined when
the table is standing on the base and is viewed from the front.)
4
NOTE:
A clean, abrasion free
surface will be necessary for
table assembly.
LEFT LIFTING COLUMN
RIGHT LIFTING COLUMN
CENTER LIFTING COLUMN
STRETCHER
Layout the left, right (and center if applicable)
lifting columns, place the stretcher into each
dovetail, connect loosely. Left & right is
determined from the end-users point of view.
Once each lifting column has been engaged,
lightly tap each connection point with a
rubber mallet 1/8-1/4 inch at a time, until
completely seated. Do not completely
install one lifting column at a time...they
must be installed incrementally.
5
6
LEFT LIFTING COLUMN
RIGHT LIFTING COLUMN
STRETCHER
STRETCHER
LIFTING
COLUMN
TOP VIEW
DOVETAIL
STRETCHER
DOVETAIL
Attaching Stretchers
