Page 15 of 20
18719901 Rev G
®
15
Carefully turn the table over (2 person operation).
NOTE:
Do NOT use either lifting column as a brace
when turning the table over, as thismay cause binding.
The top must be lifted free, rotated, and set down
carefully.
After the table is in place, install the 120v plug into the
control box. Secure the cord to the control box using
the molded-in clip. Plug the cord into an outlet.
CONTROL
BOX
PLUG
MOLDED CLIP
16
Route all cables through wire managers.
18
Keep all cables clear of moving parts!
CAUTION:
Be sure to create a 'drip loop' in the
power cord before making the connection to a
live wall socket, to prevent electric shock if
liquids spill on power cord.
Connect power cord to power supply.
17
Finishing the Table Assembly
