Steca TK-RW1, Инструкция по установке и эксплуатации

Страница: 13 / 20

13
733.847 | 10.27
EN
7.3.1 System image
;1.1: System image active: 1, inactive: 0
system_active = 1
System_active is preset in the factory to 1, so the system image can be
selected and displayed in the digital picture frame.
If system_active is set to 0, the system image cannot be selected in the
digital picture frame.
7.3.2 Time diagram
;1.2: Time diagram active: 1, inactive: 0
diagram_active = 1
Diagram_active is preset in the factory to 1, so the daily diagram can be
selected and displayed in the digital picture frame.
If diagram_active is set to 0, the daily diagram cannot be selected in the
digital picture frame.
7.3.3 WLAN after turning on the wireless LAN router
;2.1: Wireless LAN disabled after switching off the router (yes: 1 / no: 0)
wlan_disabled = 0
Wlan_disabled is preset to 0, so the wireless LAN is automatically ena-
bled after restarting the wireless LAN router.
If wlan_disabled is set to 1, the wireless LAN of the router is inactive
after restarting.
7.3.4 Wireless LAN name
;2.2: Wireless LAN name
ssid = „TK RW1 Net“
The ssid is preset to "TK RW1 Net”, so the wireless network of the wire-
less LAN router appears on the picture frame under the name “TK RW1
Net”. A change of name requires a new assignment of the network in
the digital picture frame.
NOTE
The name must always be entered with quotation marks, e.g. "MySo-
larThermalSystem”.
7.3.5 Wireless LAN channel
;2.3: Wireless LAN channel (value between 1 and 11)
channel = 6
The factory preset value for channel is set to 6. The value can be changed
between 1 and 11.
7.3.6 Wireless LAN encryption
By default, the wireless LAN router is supplied without network encryp-
tion because no security-relevant information is being transmitted. If
desired, the network can be encrypted with WEP, WPA or WPA2.
To do this, the configuration file "Config.wri" on the USB flash drive
needs to be modified (see section 7.1 "Appendix: configuration file").
The settings for the network encryption are made in "Config.wri", under
"Wireless encryption". If a network encryption is selected, a password