Steca TK-RW1, Инструкция по установке и эксплуатации

Страница: 16 / 20

16
733.847 | 10.27
EN
9.2 Procedure for inserting your own images
Wireless LAN router and digital picture frame have to be discon-
nected from the mains.
Remove USB flash drive from the wireless LAN router and plug it
into a USB port of a PC.
Copy your own images into the folder "share\Bilder". Attention. Only
JPEG images are supported!
Remove the USB flash drive from the USB port of your PC and plug
it into the wireless LAN router.
Connect the wireless LAN router to the mains and wait until it is
ready for operation.
Connect the digital picture frame to the mains and make any neces-
sary setting changes.
10 Fault finding
The wireless LAN router is a quality product and is designed for many
years of continuous use. Should, however, a fault occur, the cause of the
fault is often not the wireless LAN router itself but the peripheral system
components. The following description of some causes of problems
should help the installer and operator to isolate the problem so that the
system can be repaired as quickly as possible and to avoid unnecessary
costs. Of course, not all possible causes of problems can be listed here.
However, here you will find the most common causes of problems that
cover the majority of possible faults. Only return the wireless LAN router
when you are absolutely sure that none of the problems listed below is
responsible for the fault.
•
•
•
•
•
•