Steca TK-RW1, Инструкция по установке и эксплуатации

Страница: 10 / 20

10
733.847 | 10.27
EN
6 Initial commissioning
6.1 Commissioning for the first time
When starting the digital picture frame for the first time, please see the
Kodak EasyShare W820 user's guide "Getting started".
6.2 Language
See the user’s guide for the Kodak EasyShare W820 "Getting started",
setting the language. Once the language is selected, the digital picture
frame will start looking for wireless networks.
6.3 Wireless network
All available wireless networks will be displayed.
Select the network "TK RW1 Net" and press "OK".
6.4 Safety check
The system performs a safety check. The picture frame indicates that the
network is not secured since the delivery status of the remote display is
without any preset encryption.
There is no factory preset encryption because no security-relevant infor-
mation is being transmitted. The message box is closed by selecting
"Finish". If you want to encrypt image data, see section 7.3.6 "Wireless
LAN encryption".
6.5 Confirming the network connection
A successful connection to the wireless network “TK RW1 Net” is con-
firmed. The digital picture frame is now asking to install the EasyShare
software on the wireless LAN router.
Prompt the installation with "Search now".
6.6 Detected devices
The detected devices are listed. Select "SolarShare" and complete the
installation with "FINISHED".
6.7 Setup completed successfully
The successful installation is confirmed again.
The confirmation can be closed from the menu window "[Home]."
6.8 Home
You will see the home page of the setup. To enable the display of the
solar thermal images, select "Images and videos".
6.9 Images and videos
Available images / videos are displayed. Select "SolarShare" and confirm
with "OK".
6.10 SolarShare contents
The contents of “SolarShare“ is displayed as a thumbnail. The contents
consist of the system image with the current temperature values and
the daily diagram.
Either a single image can be displayed or a slide show can be started.
