Steca PR 2020 IP65, Руководство по эксплуатации

Страница: 4 / 24

4
718.573 | 11.27
This manual is a component of the system regulator and must be included with
the regulator when given to a third person.
The Controller is equipped with a low power surge protection. The installer had
to care for a efficient lightning protection.
1.3. Scope of Application
This manual describes the function and installation of a regulator for photovoltaic (PV)
systems for charging 12 V or 24 V lead batteries for recreational, residential, business,
commercial areas and small businesses and telecommunication.
The charge regulator is only suitable for regulating photovoltaic solar modules. Never
connect another charging source to the charge regulator. This can destroy the regulator
and / or source. Consult your specialized dealer or installer if other charging sources
should be used and observe the ”5.1. SOC Calculation” item in this manual.
The regulator is only suitable for the following chargeable 12 V or 24 V battery types:
- Lead storage batteries with liquid electrolytes
- Sealed lead storage batteries; AGM, GEL
The respective battery type must be set on the regulator, see ”6.3. Battery Type Gel / Li”.
Observe the manufacturer’s instructions before connecting the battery.
Important! The regulator is not suited for nickel cadmium, nickel metal
hydride, lithium ions or other rechargeable or non-rechargeable batteries.
Such batteries may not be connected to the regulator. Observe the respec-
tive battery’s safety instructions.
The corresponding manufacture’s installation manual must be observed when
installing the remaining components, e.g. solar module, battery or consumer.
The regulator may only be used for the particular solar applications pro-
vided. Also, observe that the permitted, model-specific, nominal currents
and voltages are not exceeded. No liability shall be assumed for any non-
compliant usage. Carefully handle the product.