I N S T A L L A T I O N
16
General guidelines for Mounting
CAUTION. Risk of malfunction. IER
electric steam humidifier must be levelled in X & Z
axis.
Installation on wall (without mounting bracket)
1.
Verify that wall structure and strength is appropriate to support the operating weight of
the IER electric steam humidifier.
In case, the wall is not solid enough to support operating weight of
IER
electric steam
humidifier, install it on a floor stand (
FS
option is available to your steamOvap
representative).
2.
Mark the wall or support according to the above holes location, and drill 4 holes to the
wall or support as per the size of anchors and/or screws.
3.
Use anchors of sufficient size (at least 1/4in [6mm]). Insert those anchors and the 2 top
screws, ensure that the screw heads extends 1/4in [6mm] from the wall, so that the
IER
electric steam humidifier will be able to be hung on those 2 screws.
4.
With front cover removed, hung the IER electric steam humidifier onto the 2 top screws.
Insert the bottom screw through the back plate of the humidifier and into the anchors
in the wall.
Ensure that the humidifier is properly levelled.
Tighten the 3 screws. Re verify the level in the 2 direction X and Z axis.
5.
Re-install the front cover to the humidifier.
6.
Optional Mounting bracket (option
MB
) is available to your steamOvap representative
in order to ease up wall mounting process.
Содержание IER-04 Series
Страница 2: ......
