SteamOvap IER-04 Series, Инструкция по установке и эксплуатации

Страница: 27 / 44

I N S T A L L A T I O N
27
IER electrical rating
Model
Steam
Capacity
Power
Current
208Vac/1p 240Vac/1p 208Vac/3p 480Vac/3p 600Vac/3p
IER-04
10lb/h
[4.5kg/h]
3.3kW 16.0A 13.9A 9.3A 4.0A 3.2A
IER-05
15lb/h
[6.8kg/h]
5.0kW 24.0A 20.8A 13.9A 6.0A 4.8A
IER-09
24lb/h
[11.4kg/h]
8.3kW 40.1A 34.7A 23.1A 10.0A 8.0A
IER-12
35lb/h
[15.9kg/h]
11.7kW - 44.2A 32.4A 14.0A 11.2A
IER-17
50lb/h
[22.7kg/h]
16.7kW - - 46.3A 20.0A 16.0
IER-22
65lb/h
[29.5kg/h]
21.7kW - - - 26.1A 20.8A
IER-31
93lb/h
[42.3kg/h]
31.0kW - - - 37.3A 29.8
IER-44
130lb/h
[59.1kg/h]
43.3kW - - - 52.1A 41.7A
IER-62
185lb/h
[84.1kg/h]
61.7kW - - - 74.2A 59.3A
Installation steps :
1. Connect supply lines (L1, L2, L3 and GND or L and N) to the corresponding terminals in
the IER electrical compartment.
Connect the earth conductor with a lug and secure it to the GND threaded stud..
2. The supply wiring is to be fed into the unit via the clamp strap on the top of the unit.
3. Ensure that an all pole disconnecting device with a minimum contact clearance of 3 mm
and a fuse protection (supplied by others) is installed on the power supply line.
4. This disconnecting device should be installed in proximity of the IER steam humidifier
(within 3 feet [1 m]) and must be easily accessible.