Stealth Products IDM-MULTI-9, Руководство пользователя

Страница: 31 / 44

Configuration Software 12.0
24
mo-Vis Configurator Parameter Settings 12.3
The mo-Vis Configurator Software allows users to change the parameters of the Multi Joystick ,
depending on the level of profile assigned.
MOUNTING SETTINGS (DEALER LEVEL)
DEADBAND SETTINGS
( Note: Most wheelchair electronics have their own default deadband setting. It is recommended to keep
the deadband at this setting.)
TILT
The Multi Joystick unit is able to detect tilt (in reference to the gravitation of Earth). The wheelchair
will stop driving when the Enable parameter is set to On and the joystick is tilted more than 70° in any
direction. The joystick becomes active again if the angle of tilt falls below 60°.
( Note: the default setting for the tilt sensor is Off.)
Setting Description Parameters
Mounting
Direction
Changes the joystick axis in
90-degree increments clockwise,
providing compensation for
joystick rotation.
Default: 0°
Min.: 0°
Max.: 270°
Increments: 90°
Setting Description Parameters
Deadband
Neutral zone around the
joystick's default (center)
position
Default: 10%
Min.: 10%
Max.: 50%
CAUTION
Incorrect programming of the wheelchair or device electronics may cause
damage to the devices or injury to the user.