R-Net™ Setup
11.0
22
Center Deadband
11.8
The
Center Deadband
parameter defines how far the joystick must be moved from neutral position
to engage the motors of power chair. The value corresponds to the diameter of a circle around the
joystick center position. No drive or menu instructions will be executed unless the joystick is moved
out of this circle.
•
Follow the first three steps in
Section 11.4
.
•
Use the navigation's
Up & Down
buttons to select
Deadband
from the list and press the
Right
button.
•
Use the
Left & Right
buttons to select the port. When in the desired position, press
Plus
+ or
Minus
- to increase or decrease the value. Values range from 10% to 50%.
Содержание IDM-MULTI-9
Страница 1: ...Multi Joystick mo Vis Series Multifunctional Proportional Wheelchair Joystick...
Страница 42: ...Notes 18 0 35...
Страница 43: ...Software Configuration X 0 36...