SCH Hide-Away Storm Shelter™ Installation manual – REV 1
Page 5
Hide-Away under side view:
Check to be sure the shelter when fully open is square by measuring from corner to corner both
sides in an X measurement and should be the same. With the shelter open locate the back wall
anchor locations and concrete anchors. Drill the anchor bolt holes using a 5/8” (Powers Bit)
concrete bit and hammer drill. (Use hearing protection)
Anchoring the shelter:
Insert the rear concrete anchors illustration and tighten evenly “do not over tighten” Clean
inside of shelter and test the folding action of the shelter several times, and shim if needed.
