stayer S60.17L, Руководство по эксплуатации

Страница: 29 / 52

eNGLISH
29
29
S60.17L
T100.20H
TIG DC 200 HF
T100.25PAHT
TIG AC/DC 250 HF
T40.20PAH
TIG AC/DC 200 HF
TIG AC/DC
315 HF
V 1ph 230 1ph 230 3ph 400 1ph 230 3ph 400
A 22 27 14 27 92
A 0 - 170 0 - 200 0 - 250 0 - 200 0-315
% 60 100 100 40 40
Kg 5 14 68 27 71
cm 34x12.5x18.5 41x18x29 64x57x35 51x44x25 105x50x110
KVA 5 6.5 9 7 8
EXTENDED TECHNICAL FEATURES
Parameter Unit
T100.25PAHT
TIG AC/DC 250 HF
T40.20PAH
TIG AC/DC 200 HF
Nominal voltage V 3ph / 400 V 1ph / 230 V
Frequency Hz 50/60 50/60
No-load voltage V 70 64
AC pulse frequency Hz 0.2 - 20 0.2 - 20
Priming HF HF
DC pulse frequency Hz 0.2 - 500 0.2 - 500
Pulse width % 1 - 99 1 - 99
AC frequency Hz 20 - 150 20 - 150
AC clean width % (-) 20 - 20 (-) 20 - 20
AC cleaning amplitude % (-)15 - 40 (-)15 - 40
Current slope: start/end s 0 - 15 0 - 15
Pre-gas time s 0 - 15 0 - 15
Post-gas time s 0 - 99.95 0 - 99.95
Efficiency % >0.85 >0.85
Duty cycle cosφ 0.7 - 0.9 0.7 - 0.9
Protection degree EN60529 IP21S IP21S
Cooling Optional: Air/Water Air
Torch WP18 SR17
DESCRIPTION OF THE EQUIPMENT
This product is an equipment for manually welding metals by
means of heat generated by an electric arch.
Technologically, the Stayer Welding equipment is an electric
power supply source for high-frequency power transfer managed
by intelligent control logics.
In contrast to traditional technology which is based on
transformers operating at 50 Hz public grid frequency, Stayer
Welding has a larger power density per weight unit, is more
economizing and has the possibility of accurate, instantaneous
and automatic control of all welding parameters.
As a result, you will more easily produce improved welding with
equipments that consume less and have a lower mass than
equivalent traditional equipments based on heavy transformers.
All Stayer Welding equipments of the TIG series are capable of
shielded electrode welding and tungsten electrode torch welding
with inert gas protection.
ILLUSTRATED DESCRIPTION OF OPERATIONS
S60.17L / T100.20H / T100.25PAHT / T40.20PAH (FIG. 1, 2, 3
and 4)
TIG DC 200 HF - TIG AC/DC 200 HF - TIG AC/DC 250 HF
1. On/off switch
2. Luminous power-on indicator
3. Luminous warning indicator
4. Welding-intensity setting control
5. Welding cable connection terminals
6. Electrode mode / TIG switch
7. Pre-gas and post-gas timer switch for inert gas discharge
(only model T100.20H-TIG DE 200HF)
8. Gas outlet for torch
9. Torch cooling water connection
10. Torch trigger connection
-
ON
OFF
%
EN60974
-