Ramiro de la Fuente
Director General
9. Regulations
9.1. Technical features
= Power in watts
= Horsepower
= Cylinder capacity
= Cutting length
= Mass
= Carburetor
= Fuel tank capacity
= Chainsaw oil tank capacity
= Ignition system
= Chain brake
= Noise
= Acoustic power level
= Sound pressure level
= Vibration
ENGLISH
9.2. EU declaration of conformity
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents:
EN 14982, EN ISO 11681-2, EN 61000-4-2, EN 61000-4-
3, CISPR 12, according to EU Regulations 2006/42/EC,
2004/108/EC, 2006/95/EC
The undersigned:
STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
That the machine:
Type:
MOTOSIERRA
Models:
8. Trouble shooting
Malfunction
System
Remark
Cause
Saw chain brake
The saw chain does not move
The saw chain brake is activated
The engine works
Ignition system
Malfunction of the fuel delivery system, compression system or mechanical
malfunction.
Ignition spark
The engine does not start or
only with difficulty
There is no ignition spark
The switch is on "STOP", failure or short circuit in the cabling, spark plug
cap or faulty spark plug.
Fuel delivery
Throttle in wrong position, faulty carburetor, suction head dirty,
fuel pipe bent or interrupted.
The fuel tank is full
Compression system
Sump seal faulty, packaging of the radial axles faulty,
cylinder or piston rings faulty.
Inside
The spark plug does not close hermetically.
Outside
Mechanical malfunction
The spring of the starter is broken, broken pieces inside the engine.
The starter does not
actuate
Carburetor
Incorrect adjustment of the carburetor.
The fuel tank is full
Ignition spark
Difficulties at hot starts
Fuel delivery
Incorrect idling adjustment, suction head or carburetor dirty. Ventilation of the
tank faulty, fuel pipe interrupted, faulty cable, faulty STOP switch.
The fuel tank is full
The engine starts but
stalls immediately
Several systems may be
involved simultaneously
Air filter dirty, incorrect adjustment of the carburetor, muffler clogged,
exhaust channel of the cylinder clogged.
The engine is idling
Insufficient power
Oil pump/tank
Oil tank empty
Oil guide slot dirty.
.
There is no oil on the
saw chain
No saw chain lubrication
c.c
SYSTEM
BRAKE
CHAIN
HP
W
L
pA
L
WA
OLMO G1-250
OLMO G2-400
OLMO G3-450
OLMO 22-400
OLMO G2-400B
OLMO G1-250B
OLMO G3-450 B
OLMO 22-400 B
22
22
