STATCON ENERGIAA SEOG Series, Руководство по эксплуатации продукта

Страница: 24 / 32

23 of 30

FAULT * 2 (INVERTER OVER-VOLTAGE): This fault occurs due to internal fault of PCU or due to loose
connections.
REMEDY:
IN CASE THESE DO NOT WORK, CONTACT THE SERVICE ENGINEER.

FAULT * 3 (BATTERY UNDER-VOLTAGE) : This fault/alarm may occur due to loose connection of your
battery or due to deep discharging of battery. The other reason of this fault may be due to issues related
battery.
REMEDY:

Check the connections of your battery.

Check the settings of your PCU in USER mode.

Check the battery voltage.

Check the battery if required.

Check all connections of your PCU.
IN CASE THESE DO NOT WORK, CONTACT THE SERVICE ENGINEER.

FAULT * 4 (BATTERY OVER-VOLTAGE) : This fault may occur due to the battery voltage exceeding your
PCU rating.
REMEDY:

Choose the battery as per your inverter rating and load.
IN CASE OF ANY OTHER REASON CONTACT TO SERVICE ENGINEER.

FAULT * 5 (SYSTEM OVER-TEMPERATURE) : This fault occurs due to overheating of PCU than its nominal
range. It may be due to fan failure or improper ventilation of room & the PCU.
REMEDY:

Check the fans of your PCU.

Check the location of PCU to suitable enviroment.

Check the ventilation holes of PCU. They should not be blocked.
IN CASE OF ANY PERSISTENT ISSUE, CONTACT THE SERVICE ENGINEER.

FAULT * 6 (TCS_FAIL) : Contact to service engineer.

FAULT * 7 (SOLAR OVERLOAD) : This fault may occur due to exceeding the load from nominal range of
your PCU or due to connecting the PV Panel of lower rating from the suggested rating of your PCU.
REMEDY:

Check the PV rating.

Check of load is exceeding the limit of PCU.

Check the battery Ah setting in user mode. (It must be as your battery specification).
IN CASE OF ANY OTHER ISSUE CONTACT TO SERVICE ENGINEER.

FAULT * 8 (SOLAR OVER VOLTAGE) : This fault may occur due to exceeding the PV output from nominal
range of your PCU.