Instruction Manual
21
Manage Client Connection to the Daemon
The SAT3540ER Manager consists of two modules:
• Daemon
• User interface
The daemon module monitors SAT3540ER status and performs Safe
volume rebuilds automatically. By default, the user interface attaches to
a daemon running on the same PC to display the information gathered
by the daemon. The user interface may also be configured to display
information tracked by a daemon module running on a remote PC that is
in the same room or at a different site. Having the user interface remote to
the daemon allows remote monitoring for system fan and hard disk drive
failures. Identification of a failed part may then allow the service provider
to replace failed components before further complications.
The daemon module listens for connections on TCP port 51115. Do not
change this port number.
Prerequisites:
Ensure you have the following before you establish the remote connec-
tion:
• The daemon is running on the PC, local to the SAT3540ER.
• The Configuration Manager user interface module is installed running
remotely.
• A TCP/IP connection can be established between the daemon listening
on port 51115 and the user interface.
