Instruction Manual
7
Installing the SAT3540ER Manager Configuration Utility
Microsoft® Windows
Insert the CD labeled 4 Bay RAID Hard Drive Enclosure into your
1.
CD-ROM drive.
When the launch screen appears, click on
2.
Install
, then select the
operating system as appropriate to begin installation.
When the InstallShield® Wizard start screen appears. Click
3.
Next
to
continue.
Remove the screws holding in the plastic brace from the tray, then se-
2.
cure the hard drive into the trays with the previously removed screws.
Repeat for each hard drive tray.
Screw #1
Screw #3
Screw #4
Screw #2
Push the tray into the enclosure until the you feel some resistance
3.
when the drive SATA connector will be making contact with that of the
SAT3540ER.
Once you are certain that the drive has been inserted as far as it can
4.
go and is snugly connected to the SATA connection, manually close the
front door of the bay.
Repeat steps 1-4 for each additional drive you wish to install.
5.
