Instruction Manual
24
Once the daemon rebuilds to a designated Hot Spare, a designated Hot
Spare will not exist and the SteelVine processor will rebuild to empty
space.
With
Automatic Rebuild
and
Immediate Rebuild
options selected, the
daemon module of the SAT3540ER Manager automatically initiates an
immediate rebuild. Alternatively, the daemon may be configured to delay
rebuild until the first write to the Safe volume by selecting the
Rebuild
Only If Needed
option. The latter setup allows temporary removal of a
hard disk drive without requiring a rebuild. To minimize the possibility of
data loss, the rebuild process should be set up to launch immediately.
With
Manual Rebuild
selected, the user decides when to initiate rebuild
following a rebuild prompt. Unless the SAT3540ER Manager is actively
monitored, the Automatic rebuild should be set up to minimize the pos-
sibility of data loss.
In case you select
No
in response to a rebuild prompt, select
Scan De-
vices
from the
File
menu of the Status window to trigger a new prompt.
If a power failure interrupts a rebuild, the daemon will restart the rebuild
process.
