Starmix GS 10 Series, Руководство по эксплуатации, Страница: 13 / 96

4. Fields of application.
For wet and dry suction cleaning. Not suitable for
vacuuming health hazardous dusts. The suction cleaner with
socket and ON/OFF automatic switching system is intended
for the connection of electric tools.
Filter sack FSP 5500 S polyester for stainless
steel container for FP.. 3600 and
FP.. 7200
Order No. 41 35 18
Folded filter cartridge FP 3600 Order No. 41 34 57
Folded filter cartridge FPPR 3600
polyester for vibrator operation
Order No. 41 34 64
Folded filter cartridge FP 7200 Order No. 41 34 71
Folded filter cartridge FPPR 7200
polyester for vibrator operation
Order No. 41 33 72
Foam filter FSS 1200 Order No. 41 32 97
Further accessories are given in the special acessories list or
upon request.
5. Assembly
When unpacking, check that the appliance is complete and
that there is no transport damage.
Open the lock-in closures r of the 20-l and 32-l container,
and lift off the top section 1 . Tip over the container and
press in the steering rollers with pivot u until they lock into
place. Screw the large wheels t onto the axles z ; see
fig. A.
The supplied steel axle z for the 45-l container is pushed
through the guide on the container, after which the wheels
t and steering rollers u are mounted as indicated in
fig. B.
The steering rollers u for appliances with 35-l and 55-l
stainless steel containers with chassis crosshead are
mounted as indicated in fig. C.
Insert suction tube p (when contained in scope of
supply) into the container guide from above and push
down until it engages.
– Take hold of the paper filter bag i at the flange
and push vertically from above into the guide of the
cyclone suction opening
e until the stop point is
reached. The bag must rest against the container wall;
see fig. F.
For stainless steel containers, push the flange onto the
suction opening at the bottom first and then at the top,
then keep pushing as far as it will go.
– The bag increases the dust retaining capacity
and is intended for hygienic disposal. Paper
filter bags can only be used for dry suction
cleaning.
– Place the filter sack 9 in the container w respectively
for stainless steel containers slip over the edge of the
container, see fig. G.
Remove the filter for wet suction cleaning.
5.1 Container
w
.
5.2 Filters
8
–
q
.
12
Fitting the filters, depending upon the given model:
– Push the folded filter cartridge 0 in a straight
manner over the case 5 , right up to the stop point, and
lock the bayonet mount q ; see fig. D. The folded filter
is suitable for wet and dry suction cleaning.
– Foam filter
Push the foam filter 8 over the case 5 to suck up
water; see fig. E.
5.4 Socket with ON/OFF automatic
switching system.
For suction cleaners with socket and ON/OFF automatic
switching system.
The socket 2 e is intended for the connection of electrical
tools. In the “0“ switch setting, the socket can be used as an
extension line (e.g. for a light).
Connected load: Suction unit and appliance max. 16 A
WARNING! An electric tool must be switched off when it
is connected. The socket is always live when the plug is in-
serted in a mains socket, irrespective of the switch position.
The suction openings of electric tools are not stan-
dard. Consequently, an adapter (rubber nozzle) 582627 is
available that can be shortened to fit the given electric tool.
For other suction connections contact your dealer or the
manufacturer of the given electric tool.
From time to time, or when the suction force decreases, take
out the motor protection filter
7 for cleaning; see fig. I.
Place the top section 1 right-way-round on the
container as indicated in fig. H. Observe the anti-rotation
protection. The paper filter bag
i must not be damaged,
and the lock-in closure r must engage securely.
Attach the park clip o (if included) for the suction tube
parking position; see fig. J.
5.3 Top section
1
.
5.5 Filter cleaning.
Appliances fitted with an electromagnetic cleaning device
can remove the dust adhering to the folded filter
0 by vibra-
tion. This ensures optimal use of the folded filter and extends
the operating cycles.
The vibrating device should be activated (switch setting V) at
the latest when the volume flow display
2 d (warning light)
lights up.
RS,TS, S.6-95 09.11.2005 11:20 Uhr Seite 9