background image

3

IMPORTANT SAFETY INFORMATION

Only use a suitable means of transport and lifting devices with sufficient weight bearing capacity 

when transporting the generator.
Secure the generator on transport vehicles to prevent it from rolling, slipping, and tilting.
Industrial applications must follow OSHA requirements.
Do not leave the generator unattended when it is running. Turn off the generator (and remove safety

keys, if available) before leaving the work area.

The generator can produce high noise levels. Prolonged exposure to noise levels above 85 dBA is 

hazardous to hearing. Wear ear protection when operating the generator or when working nearby 

while it is operating.

Wear ANSI-approved safety glasses and hearing protection during use.
People with pacemakers should consult their physician(s) before use. Electromagnetic fields in

close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure.

Caution is necessary when near the engine’s or recoil starter.

Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or 

dust. Gasoline-powered engines may ignite the dust or fumes.

Stay alert, watch what you are doing and use common sense when operating this generator. Do not 

use while tired or under the influence of drugs, alcohol or medication.
Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from 

moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

Do not cover the generator during operation.
Keep the generator and surrounding area clean at all times.

Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially 

when refuelling.

Use the equipment, accessories, etc., in accordance with these instructions and in the manner 

intended for the particular type of equipment, taking into account the working conditions and the 

work to be performed. Use of the equipment for operations different from those intended could result 

in a hazardous situation
Do not operate the equipment with known leaks in the engine’s fuel system.

When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning 

materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom 

ventilated, covered, metal container.
Keep hands and feet away from moving parts. Do not reach over or across equipment while 

operating.
Before use, check for misalignment or binding of moving parts, breakage of parts, and any other

condition that may affect the equipment’s operation. if damaged, have the equipment serviced

before using.

Use the correct equipment for the application. Do not modify the equipment and do not use the

equipment for a purpose for which it is not intended.

Содержание 65064























Отзывы: