Stark 65064, Инструкция по эксплуатации и правила безопасности

Страница: 14 / 22

ALTERNATING CURRENT (AC) CONNECTION
When using the generator, make sure the total load is within rated output of a generator. Otherwise,
generator damage may occur.
TIP:
Application wattage indicates when each device is used by itself. The simultaneous usage of
AC and DC power is possible but total wattage should not exceed the rated output.
The overload indicator light comes on when total wattage exceeds the application range.
NOTICE
Do not overload. The total load of all electrical appliances must not exceed the supply range of the
generator. Overloading will damage the generator.
When supplying precision equipment, electronic controllers, computers, microcomputers or battery
charges. Keep the generator a sufficient distance away to prevent electrical interference from the
engine. Also ensure that electrical noise from the engine does not interfere with any other electrical
devices located near the generator.
Some electrical appliances or general purpose electric motors have high starting currents and
cannot be used, even if they lie within the supply ranges given in the above table.
MAINTENANCE
13
The engine must be properly maintained to ensure safety, trouble-free and eco-friendly. In order to
keep your gasoline engine in good working condition, it must be periodically serviced. The following
maintenance schedule and routine inspection procedures must be carefully followed.