StarBand
®
Installation and User Guide
7
Tx
(Transmit signal indicator): When this green LED is flashing, the
satellite modem is transmitting data to the satellite. This light is only on
when the StarBand modem is sending communication to the satellite.
VPN
(Virtual Private Network) – Not enabled for StarBand customers.
NOTE
:
A modem that has not been configured will have only the PWR
LED illuminated.
The rear of your StarBand SkyEdge satellite modem has the following
connections:
RF-IN
(Female F-Type connector): The Rx coaxial cable from your
satellite out-door unit connects to this port.
Serial
(DB-9 serial port): Standard Serial Port. This connection is not
enabled in StarBand-provided SkyEdge IP modems.
LAN
(RJ-45 Ethernet port): Use the supplied Ethernet cross-over
cable to connect the LAN port of your modem to your computer.
NOTE: If the included cable is lost or damaged you can use any high
quality Crossover-type Category-5 Ethernet cable of similar length.
Straight-Through or “Patch” type cables will not work with your
SkyEdge IP.
RF-OUT
(F-Type Connector): The Tx coaxial cable from your satellite
out-door unit connects to this port.
POWER
– (DIN connection for power supply cable, +24vdc/2.8A)
