STAR TRAC FITNESS Pro Tread AC 7600, Руководство по обслуживанию

Страница: 34 / 68

Service Manual: E-TR and E-TRi 32
CALIBRATE SCALE
⇒
Press ‘Start’ key
Display will enter CALIBRATE SCALE mode and scroll the following:
1 = INPUT SPAN WEIGHT
2 = CAL SPAN WEIGHT
3 = CAL ZERO WEIGHT
4 = VERIFY WEIGHT
PRESS STOP TO EXIT

Loop
⇒
Pressing ‘Stop’ will return to MAINTENANCE MODE
⇒
Press ‘1’ key
Unit will read REF WEIGHT = 155
Enter your exact weight *It is advisable to weigh yourself for accuracy just before performing this step.
After entering your weight press either the ‘Start’ or ‘OK’ keys.
Display will read : STEP ON WEIGHT PADS
PRESS OK TO BEGIN

Loop
⇒
Pressing ‘OK’ will read CALIBRATING X (X = your entered weight)
If no weight entered, unit will read:
CAN NOT CALIBRATE
NO WEIGHT ACQUIRED
PRESS OK TO RETRY
PRESS STOP TO EXIT

Loop
⇒
Pressing ‘OK’ will return to previous step
⇒
Pressing ‘Stop’ will return to MAINTENANCE MODE
⇒
Press ‘2’ key
Display will read: PLACE CAL WEIGHT
ON WEIGHT PADS
PRESS OK TO BEGIN

Loop
⇒
After pressing ‘OK’ unit will read CALIBRATING X (X = calibrated weight)
If no weight entered, unit will read:
CAN NOT CALIBRATE
NO WEIGHT ACQUIRED
PRESS OK TO RETRY
PRESS STOP TO EXIT

Loop
⇒
Pressing ‘OK’ will return to previous step
⇒
Pressing ‘Stop’ will return to MAINTENANCE MODE
⇒
Press ‘3’ key
Display will read: REMOVE WEIGHTS
PRESS OK TO BEGIN
⇒
After pressing ‘OK’ unit will read CALIBRATING X (X = weight zero)
If no load cells detected, unit will read:
CAN NOT CALIBRATE
NO WEIGHT ACQUIRED
PRESS OK TO RETRY
PRESS STOP TO EXIT

Loop
⇒
Pressing ‘OK’ will return to previous step
⇒
Pressing ‘Stop’ will return to MAINTENANCE MODE
⇒
Press ‘4’ key
Display will read: WEIGHT= 0 and display the weight as detected
⇒
Press ‘Stop’ key once to return to the CALIBRATE SCALE mode
⇒
Press ‘Stop’ key a second time to return to the MAINTENANCE MODE