– 52 –
DIP-SW 2
Switch
Function
ON
OFF
2-1~2-4
Always ON
Should be set to on
The factory settings of DIP switch are all on.
DIP Switch
ON
OFF
3-1
Fixed at OFF
3-2
Initialize of setting information
—
Change DIP Switch 3-2 to ON initialize the setting information when the power is turned on.
The factory settings of DIP switch are all off.
LED Display
Green :
Lights when pockets are received.
Note:
•
This product contains a built-in wireless device and can only be used in the following
countries.
USA, UK, France, Ireland, Belgium, Germany, Austria, Switzerland, Italy, Denmark,
Norway, Sweden, Portugal, Spain, Estonia, Finland, Greece, Luxemburg, Netherlands,
Canada, Slovakia, Slovenia, Czech, Hungary, Poland, Latvia, and Lithuania.
•
This product contains Transmitter Module which conforms to the R&TTE Directive.
•
This product contains Transmitter Module FCC ID: M4B6180210.
•
This product contains Transmitter Module IC: 5844A-6180210.
•
Strictly observe the export control laws of the country for export when exporting this
product.
No. 1 2
OFF
ON
DIP Switch 3
LED
DIP-SW 3
*1 ASB Function
When this function is enabled, status information is automatically sent to the host whenever the
printer status changes (such as when the cover is opened, paper runs out, or an error occurs).
For information about automatic status information transmission, refer to the separate Program-
mer's Manual (Star Line Mode and ESC/POS Mode).
*2 NSB Function
When this function is enabled, status information is sent automatically whenever the printer
enters into reverse forwarding mode.
For information about automatic status information transmission, refer to the separate Program-
mer's Manual (Star Line Mode)
