– 47 –
11-3. USB Interface Model
ON
ON
OFF
OFF
DIP-SW 1
Switch 1-1
Command emulation
ON
Star Mode
OFF
ESC/POS Mode
The factory settings of DIP switch are all on.
The functions of switches 1-2 through 1-10 will change according to the command emulation
that has been set using switche 1-1.
(1) Star Line Mode
Switch
Function
ON
OFF
1-1
Command emulation
Always ON
1-2
Should not be changed (Should be set to on)
1-3
Should not be changed (Should be set to on)
1-4
Sensor adjustment
Invalid
Valid
1-5
USB mode
Printer class
Vendor class
1-6
Handshaking conditions
(conditions for BUSY)
Offline or receive
buffer full
Receive buffer full
1-7
ASB function *1
Printer class
Valid
Invalid
Vendor class
Invalid
Valid
1-8
NSB function *2
Printer class
Valid
Invalid
Vendor class
Invalid
Valid
1-9
Low-power consumption mode
nvalid
Valid
1-10
Should not be changed (Should be set to on)
*1 ASB Function
When this function is enabled, status information is automatically sent to the host whenever the
printer status changes (such as when the cover is opened, paper runs out, or an error occurs).
For information about automatic status information transmission, refer to the separate Program-
mer's Manual (Star Line Mode and ESC/POS Mode).
*2 NSB Function
When this function is enabled, status information is sent automatically whenever the printer
enters into reverse forwarding mode.
For information about automatic status information transmission, refer to the separate Program-
mer's Manual (Star Line Mode)
No. 1 2 3 4 5 6 7 8
No. 1 2 3 4
9 10
DIP-SW 1
DIP-SW 2
