Star Micronics TCP300V Series Скачать руководство пользователя страница 61

Страница: 61 / 66

��

�

��

�

��

Memory card is not

initialized!

��

�

��

�

��

Real time clock is

not set up!

��

�

��

�

��

Can not correct this

card!

��

�

��

�

��

This card is

invalid!

��

�

��

�

��

Can not record

history on this

card!

When trouble occurs

•

Display message

If the following messages appear on the display during operation, check the following cause and
handling procedures.
If the message continues to appear after taking measures to handle the problem, contact your dealer.

Cause:

No memory card has been set.

Handling:

Turn on the power to the card reader/writer while

pressing the

key, and set the compact flash card

(system). ( See page 41)

Cause:

The real-time clock LSI is not set.

Handling:

Turn on the power to the card reader/writer while

pressing the

key, and set the time. ( See page 36)

Cause:

The card has already been corrected, or it is a card that
was used on a different machine.

Handling:

Only cards that have not been corrected, or machines

having the same operating information of the last time,
and the same shop number can make corrections.

( See page 17)

Cause:

A card that cannot be used was inserted.

Handling:

Check whether this is a card that can be used with this

system.

If it is a card that can be used with this system, check it
is unusable because of scratches or bends. Issue a new
card. ( See page 20)

Cause:

The memory card is full of history information.

Handling:

When transmission is valid, manually transfer the

information. If transmission is not valide, use "Delete
history" to erase the history information. ( See page

27)

Содержание TCP300V Series



































































Результаты поиска

Содержание TCP300V Series

Отзывы:

Star Micronics TCP300V Series, Руководство по эксплуатации, Страница: 61 / 66

Результаты поиска

Содержание TCP300V Series

Отзывы: