Star Micronics TCP300V Series Скачать руководство пользователя страница 22

Страница: 22 / 66

��

�

��

�

��

Insert card to

correct last issue

��

�

��

�

��

Sales

No.

[A123456-00200]

Last Pnt

[ +50p]

Total Pnt

[ 700p]

��

�

��

�

��

No.

[A123456-00200]

This time P

[ +50p]

Total Pnt

[ 750p]

��

�

��

�

��

Correct data?

[

YES

]

[NO]

��

�

��

�

��

Function 1

[

Correct last issue

]

[Rewrite card]

[Issue new card]

[Set member's name]

Basic Operations

•

Correcting previous point operations

Only the previous points that were added or subtracted by purchasing an item, returning an item or
converting points can be deleted.

Press

while the system is idling.

In Function 1, use either

to select [Correct last item],

and press

Insert a member card.

The last operations, card number, the number of points remaining

from the last time, and the current total number of points are
displayed.

A confirmation for correcting the data is displayed.

Use

to select [YES].

[YES] and [NO] can be switched using

and

. Use

confirm the selection.

If [NO] is selected, the system idles again.

The member card data and display are re-written.

Only the device that has the operating information of the last

time, and the same shop number can make corrections. The
device control number does not have to be the same.

Содержание TCP300V Series



































































Результаты поиска

Содержание TCP300V Series

Отзывы:

Star Micronics TCP300V Series, Руководство по эксплуатации, Страница: 22 / 66

Результаты поиска

Содержание TCP300V Series

Отзывы: