D-F0382 NP-266/366 Product specifications Ver.1.10
30
16) Printer initialization
: << ESC @ >>
Code
: [1B] h + [40] h
Clears the data stored in the print buffer and resets each setting to default values.
* It does not clear the data stored in the internal receive buffer.
*
For each mode status in each setting function, refer to section 5.6 the
mode status (Line mode) for setting function, [ESC @].
* It is stored in the internal receive buffer and activated sequentially.
17) “n” line page length setting: << ESC C n >>
Code
: [1B] h + [43] h +n * [01
≤
n
≤
FF] h
Sets a page length for “n” lines with current line feed pitch.
* Position is set to the head of page
* Line pitch change after setting will not change page length.
* Default value for “n” is [42] h for 66 lines.
* If printer is initialized, the head of page is also initialized.
18) Horizontal tab position set
: << ESC D n1 n2 --- NUL >>
Code
: [1B] h + [44] h + n1 + n2 + --- + [00] h
*[00
≤
n
≤
FF] h
Sets the horizontal tab position
1. “n” indicates the digits number from the left to horizontal tab position . In this case, n =
tab position - 1.
2. Tab position is set at the location of character width x n from the beginning of a
line. The character width in this case includes character right space. When double
width function is set, then the width becomes double of ordinary character.
3. Maximum number of tab positions is 32. If setting exceeds 32, then
the exceeded values are neglected.
4. < ESC D NUL > clears all tab positions being set. After the tab is cleared,
horizontal tab will be ignored.
5. Default value is set at every 8 characters of font A (at 9
th, 17th, 25th and 33rd digit).
19) Bold print set/reset :<< ESC E n >>
Code
: [1B] h + [45] h + n
* [00
≤
n
≤
FF] h
Sets and resets the bold print
* “n” is only valid for LSB (b0)
LSB (b0) is defined as following.
b0 Values
0
Resets bold print
1
Sets the bold print
Valid
for
all
characters
Bold print and double strike results in the same on this printer.
The default value of “n” is [00] h.
