D-F0382 NP-266/366 Product specifications Ver.1.10
48
3) Print page feed
: << FF >>
Code: [0C] h
Prints the data in the page buffer selected in the print/edit page.
* The data in the page buffer is not cleared after printing.
* The next print/edit position will be at the start position of the line.
4) Line feed : << LF >>
Code: [0A] h
Moves the print/edit position to the start position of the next line.
The line feed amount at this time will be:
< print/edit direction 0, 1, 2 > : height of cha line space
< print/edit direction 3, 4, 5 > : width of cha line space
Printing is not executed until “print page feed” is input.
5) Printer initialization : << ESC c >>
Code: [1B] h + [63] h
Clears the print data stored in the all page buffer and resets each setting to the default values.
* The data in the reception input buffer is not cleared.
* Please refer to the section 5.7 Mode status of setting function (Page mode) <ESC c> for the
other function settings.
* The next print/edit position will be at the start position of line of the page 0.
6) Print/edit page clear : << ESC I >>
Code: [1B] h + [49] h
Clears the print data stored in the page buffer selected in the print/edit page.
* Each setting is not cleared.
* The next print/edit position will be at the start position of line.
7) Print density setting : << GS ~ n >>
Code: [1D] h + [7E] h + n * [41
≤
n
≤
87] h
Make a setting for the print density between 65% and 135% from the standard print density of
(DS1-4 OFF).
* Make a setting between [41]h (65%) ~ [82]h (130%) in actual use, although the range of “n” is set
between [41]h (65%) ~ [87]h (135%)
* By the DIP SW setting of (S2-1), you can set the default status for 100% or 125%.
* This command takes priority over the DIP SW settings.
8) Set page length
: << ESC I n1 n2 n3 >>
Code: [1B] h + [6C] h + n1+ n2 + n3
* ['012’
≤
n1n2n3
≤
'150’]
Set the page range (where printing and editing is possible) by mm.
*The next print/edit position will be at the start position of line of the selected page.
*Data in the Page Buffer will not be cleared.
*The default status of page length is '150'mm
* ’110’mm for NP-366
