-5-
Backlighting
- Connect terminal 11 of the
green connector to the
dash lights, ignition switched
power, or other switched 10-
16VDC
(19-30VDC for the
LCS771-28)
power source.
This controls the backlighting
for the face of the siren.
Park/Kill Feature
- If you would like the siren to automatically disengage when the
vehicle door is opened or when the vehicle is placed into park,
connect terminal 12 of the green connector to the dome light,
added door switch, or added park switch. Review the wiring
diagram on the page 2 and ensure that you have the
PK Polarity
DIP switch set for the correct polarity
(see next page)
.
Slide Switch -
(Metal Terminal Block)
Connect the lights that you wish to
activate with each corresponding slide switch position to the
three metal terminals located towards the center of the siren
(20A max each).
(Note: the second slide switch position activates both 1 and 2
and the third slide switch position activates 1, 2, and 3)
.
(Optional Electrical Connections CONT’D)
SW1 - SW6 -
(Bundled Wires)
Connect the lights that you wish to activate with
each switch (S1-S6) to the corresponding wire color indicated in
the wiring diagram on page 2 (20A max each).
1 2 3
Microphone -
(Connector With Red, Yellow, and White Wires)
If you ordered a
model with the optional microphone (30232-2AMP), attach it to
this connector (see page 11).
