-1-
Installation Notes
The LCS771 Siren Amplifier is a premium 200W unit designed for dual 100W speaker
use. It can be utilized with or without an optional hand held microphone (not
included with the LCS771-LM). The primary operating modes are Phaser, Yelp, Wail,
Hands Free, Manual, Alert, and Radio. A Noise Canceling PA Override (when used
with optional microphone) and push-button Horn Override are available in all
modes. A manual push-button is provided for push-on/push-off tone toggle
operation in the Phaser, Yelp, and Wail modes. It also allows manual siren control in
the Manual or Alert modes. Any siren tone can be re-programmed to a more
desired tone. Another feature allows cycling through Wail, Yelp, Phaser, and
Standby by providing a signal to the horn ring auxiliary wire when the function switch
is in the Hands Free (HF) position. A Park Kill option is provided for connection to a
door switch, etc. to disable the siren when exiting the vehicle. Radio and PA volume
controls are provided on the front panel. The front panel is backlighted with LED's
for night visibility. This compact unit utilizes short circuit, high voltage, low voltage,
and reverse polarity protection systems for maximum service life.
General Description
Proper installation of the unit is essential for years of safe, reliable operation. Please
read all instruction
before
installing the unit. Failure to follow these instructions can
cause serious damage to the unit or vehicle and may void warranties.
Qualifications -
The installer must have a firm knowledge of basic electricity, vehicle
electrical systems and emergency equipment.
Keep These Instructions
- Keep these instructions in the vehicle or other safe place
for future reference. Advise the vehicle operator of the location.
Unpacking
- Inspect contents for shipping damage. If found, alert carrier
immediately. Contents should include unit with microphone, mounting bracket w/
hardware, microphone bracket with 2 screws, wiring connector, and these
instructions. Contact your supplier immediately if any components are missing.
Mounting Tips
Mount in a location with adequate ventilation to prevent overheating.
Devices should be mounted only in locations listed in SAE standard J1849.
Controls should be placed within convenient reach of the driver.
Assure clearances before drilling in vehicle.
Sound levels produced by attached speakers can cause permanent hearing loss.
Never operate this unit without adequate hearing protection for you and others
in the area. (OSHA 1910.95)
Consider wire routing and access to connections.
Install mounting bracket to vehicle using 1/4" hardware (not supplied).
