-2-
Electrical connections to this unit are made at several locations on the back of the
siren:
Most siren related connections are made through the removable green
12-terminal connector located in the rear of the unit
(See below - Part #
CPSS-153)
.
Slide Switch power inputs and outputs are made through six metal screw
terminals.
Rocker Switch power inputs and outputs are made through three groups
of loose wires that exit the rear of the unit.
Electrical Connections
Please note that this is an upside down view of the rear of
the siren.
This allows you to see the wiring diagram located on the
bottom of the siren, as well as giving you easier access to
the screw heads found on the green terminal connector.
