Stanley STGS7115, Руководство пользователя

Страница: 11 / 44

Warning: Under extreme working conditions,
conductive dust and grit may accumulate on the
housing interior when handling metal workpieces.
This could create an electric shock hazard as it weakens the
protective insulation in the grinder.
To avoid accumulation of metal chips in the interior of the
grinder, we recommend cleaning the ventilation ducts daily.
Refer to Maintenance.
Using Grinding Wheels
Warning: Metal powder accumulates. Excessive
use of the grinding wheel on metals may
increase the risk of electric shock. To reduce the
risk, insert the RCD before use and clean the ventilation
ducts daily. Follow the maintenance instructions below to
blow dry compressed air into the ventilation ducts.
Maintenance
Stanley power tools have been designed to operate over a
long period of time with minimal maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning: To minimize the danger of serious
personal injury, please switch off the tool
power and disconnect all plugs before
adjusting or removing/installing any accessory. Before
reassembling the tool, press and release the trigger switch
to make sure the tool is already switched off.
Lubrication
This power tool does not require separate lubrication.
Cleaning
Warning: Once visible dust accumulates on the
ventilation ducts and the surrounding,
immediately use dry air to blow away dust and
grit out of the interior of the housing. You need to wear
approved eye and facial protective gear when performing
this process.
Warning: Never use solvents or harsh chemicals
to clean non-metal parts of the material of the
parts. Use only mild soap and damp cloth to
clean the tool. Never let any liquid get inside the tool; never
immerse any part of the tool into liquid.
Accessories
Warning: Excluding accessories provided by
Stanley, all other accessories have not been
tested for product compatibility. Using such accessories
together with this tool may cause safety hazards. To
minimize the risk of personal injury, we recommend you to
use only Stanley accessories with this product.
Please inquire at your dealer for more information regarding
suitable accessories.
Technical Data
11
(Original instructions)
ENGLISH
STGS7115
Input voltage V
AC
220-240
Power input W 710
Frequency Hz 50/60
No-load speed min
-1
11000
Wheel diameter mm 115
Spindle size M14
Max grinding disc
thickness
mm 6
Type of wheel 27
Weight kg 1.8
Level of sound pressure according to EN 60745:
Sound pressure (LpA) 90.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 101.5 dB(A), uncertainty (K) 3 dB(A)
Vibration emission value ah:
ah,AG = m/s² 5.6
Uncertainty K = m/s² 1.5