Stanley QPM CORDLESS TOOL, Инструкция по эксплуатации

Страница: 16 / 56

Cordless Tool
10
Operator Protection
Humidity 0 to 95 % non-condensing
1.6.2 Noise Level
A-weighted emission sound pressure level at the work station < 70dBA (ref 20μPa) as determined according to
ISO 15744-2002.
1.6.3 Vibration Level
STANLEY Assembly Technologies hereby declares the following sound and vibration emission levels as required
by the Machinery Directive 98/37/EC.
A-weighted emission sound pressure level at the work station LpA (ref 20µPa) is < 70dB(A). Value determined
according to ISO 15744-2002 * using as basic standards ISO 3744 and ISO 11203.
Weighted emission root mean square acceleration level at the handle is < 2.5 m/s². Value determined according
to ISO 28927-2:2009 * (3-axis)
* Operating conditions for all measurements: full rated speed, no load, rated supply voltage.
WARNING
VIBRATION HAZARDS
To Avoid Injury:
• This information is provided to assist in making rough estimates of sound and vibration exposure levels in
the workplace. The declared emission values were obtained by laboratory type testing in accordance with
the stated standards. Levels measured in individual workplaces may be higher.
• The actual exposure levels and risk of harm experienced by an individual user depends upon the work
piece, workstation design, duration of exposure, and the physical condition and work habits of the user. To
help prevent physical impairment, a program of health surveillance is highly recommended to detect early
symptoms which may relate to sound and/or vibration exposure, such that appropriate preventive measures
may be taken.
1.7 Operator Protection
WARNING
ROTATING EQUIPMENT
To Avoid Injury:
• Always wear eye and foot protection when operating, installing, or maintaining power tools, and when in
areas where power tools are being used, maintained, or installed. Some applications may require the use
of safety glasses and face shields. Use eye protection that conforms to ANSI Z87.1.[3] and ANSI Z41-PT99M
I/75 C/75.
• Always stay alert when operating tools and/or their accessories. Do no operate tools and/or their accessories
while tired, under the influence of drugs, alcohol or any other mind-altering substance.
• Repetitive work motions or vibration may be harmful to your hands, arms, shoulders or back.
• Use suitable protective equipment and work methods whenever an application presents a hazard.