Stanley QPM CORDLESS TOOL, Инструкция по эксплуатации

Страница: 21 / 56

Instruction Manual
15
Introduction
1.7.8 Operating Hazards
WARNING
OPERATING HAZARD
To Avoid Injury:
• Use of the nutrunner may expose the operator’s hands to hazards including crushing, impacts, cuts, abrasions
and heat. Wear suitable gloves to protect hands.
• Operators and maintenance personnel must be physically able to handle the bulk, weight and power of the
nutrunner.
• Hold the nutrunner correctly; be ready to counteract normal or sudden movements – have both hands
available.
• Maintain a balanced body position and secure footing.
• In cases where the means to absorb the reaction torque are requested it is recommended to use a suspension
arm whenever possible. If that is not possible, side handles are recommended for straight nutrunners and
pistol grip nutrunners. In any case it is recommended to use means, such as reaction bars, to absorb the
reaction torque above: for straight nutrunners 4 Nm, for pistol grip nutrunners 110 N, for angle nutrunner
200 N.
• Use only lubricants recommended elsewhere in this instruction manual.
• Fingers can be crushed in open-ended crowfoot nutrunners.
• Do not use in confined spaces: beware of crushing hands between nutrunner and work piece, especially
when in Disassembly mode.
1.7.9 Accessory Hazards
WARNING
ACCESSORY HAZARD
To Avoid Injury:
• Disconnect the nutrunner from the power supply (battery pack) before changing the inserted tool or accessory.
• Do not touch sockets or accessories during operation, as this increases the risk of cuts, burns or vibration
injuries.
• Use only sizes and types of accessories and consumables that are recommended elsewhere in this instruction
manual.