•
Remove Gasket (
34
)
from the Handle Assembly (
33
).
•
Remove O Ring (
42
) from the Hydraulic tube of the Head Assembly (
12
).
•
Separate the Handle Assembly (
33
) from the Head Assembly (
12
).
•
Remove Gasket (
32
)
from the Head Assembly (
12
).
Assemble in reverse order noting the following points:
•
Seals and gaskets should be checked for damage and replaced as necessary. Lubricated seals and gaskets
with Molykote 55M grease (07992-00075).
•
Apply Loctite 243 to Clamp Nut (
50
) and tighten to torque 14.91 Nm (11ftlb).
•
Ensure that the Air Chamber (
56
)
is screwed fully into the Handle Base (
46
) so that there are no visible
gaps between the parts.
6.1.5 Trigger
•
Using the 2mm Pin Punch (07900-00158) drive the Trigger Pin (
36
) out of the Handle Assembly (
33
) and
remove the Trigger Button (
6
.)
•
Unscrew the Trigger Valve (
35
) using the trigger valve extractor (07900-00692).
ENGLISH
20
