Stanley 71504, Инструкция по эксплуатации и обслуживанию

Страница: 6 / 44

2. SPE CIFICATION
2.1 INTENT OF USE
The 71504 Module is principally a piston and cylinder assembly. When coupled hydraulically to a compatible hydraulic
power source and the relevant nose assembly is attached, it is then used to install blind rivets up to 6.4mm (1/4”) in
diameter, in Industrial Environments.
The placing module may only be used in accordance with the operating instructions for placing Stanley Engineered
Fastening structural rivets.
DO NOT use under wet conditions or in the presence of fl ammable liquids or gases.
The safety instructions must be followed at all times.
2.2 TOOL SPECIFICATION
SPECIFICATION METRIC IMPERIAL
Force: Pull at stated pull pressure 22.7 kN 5103 lbf
Pressure: Maximum 400 bar 5800 PSI
Stroke: Piston Stroke 26.0 mm 1.125 in
Piston Bore Diameter: Minimum 6.4 mm 0.25 in
Weight: Without nose equipment 1.98 kg 4.36 lbs
2.3 TOOL DIMENSIONS
All dimensions are shown in millimetres.
6
E N G L I S H O R I G I N A L I N S T R U C T I O N