Stanford Research Systems DS335, Руководство пользователя

Страница: 19 / 86

Features 2-5
DS335 Synthesized Function Generator
Front Panel Features
1) Power Switch The power switch turns the DS335 on and off. The DS335 has a battery
backed up system RAM that remembers all instrument settings.
2) Data Entry Keys The numeric keypad allows for direct entry of the DS335's parameters. To
change a parameter value simply type the new value. Entries are terminated
by the UNITS keys. A typing error may be corrected by pressing the
corresponding function key. For example, if the wrong numeric key is
pressed while entering a new frequency, pressing the [FREQ] key will
backspace over the last entered digit. If there are no digits left, the current
frequency value is displayed. The [+/-] key may be selected at any time
during numeric entry.
3) Units Keys The UNIT keys are used to terminate numeric entries. Simply press the key
with the desired units to enter the typed value. Some parameters have no
particular units and any of the unit keys may be used.
The unit keys also increase and decrease the numeric value in the DS335's
display. Pressing the [UPARROW] key adds one to the flashing digit value,
the [DOWN ARROW] key subtracts one from the flashing digit value. To
change the position of the flashing digit, press [SHIFT] [LEFT ARROW] or
[SHIFT] [RIGHT ARROW]. A few of the display menus have more than one
parameter displayed at a time. The [SHIFT][LEFT ARROW] and
[SHIFT][RIGHT ARROW] keys select between left and right.
4) Shift Key The shift key selects the function printed above the keys. Pressing [SHIFT]
and then the desired key to select the specific function (for example
[SHIFT][50
Ω
] sets the source impedance to 50
Ω
. When the SHIFT key is
pressed the SHIFT LED will light. Pressing [SHIFT] a second time will
deactivate shift mode.