MH-X50+ LED Spot
14
Troubleshooting
A few common problems that may occur during operation are shown in the following. Here are some sugges-
tions for easy troubleshooting:
The device does not work, no light and the fan does not work
1. Check the power connection and main fuse.
No response to the DMX controller
1.
The DMX indicator should flash. If not, check the DMX connectors and cables to see if they are properly
linked.
2.
If the DMX LED flashes and there is no response, check the address settings and DMX polarity.
3. Try to use another DMX controller.
4. Check if the DMX cables run near or alongside high-voltage cables that may cause damage or interference
to the DMX interface circuit.
If the procedures recommended above do not succeed, please contact our Service Center. You can find the
contact information at www.thomann.de.
Cleaning
Clean the optical lenses which are accessible from the outside periodically to optimise light output. The clean-
ing frequency depends on the environment in which the device operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s optics.Clean with soft cloth using normal glass
cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days.
Technical data
Number of DMX channels
8, 14
LEDs
One 50-W LED
Input voltage
230 VAC, 50 Hz
Power consumption
135 W
Fuse
5 mm × 20 mm, 2 A, 250 V, fast characteristic
Dimensions (W × D × H), when light beam is
pointing straight upwards
240 mm × 280 mm × 370 mm (9.4 in. × 11.0 in. × 14.5 in.)
Weight
10.3 kg (22.7 lbs)
