MH-X50+ LED Spot
4
Installation
You can install the device on the wall, the ceiling or on the ground. A mounting bracket and the required screws
are provided together with the device.
WARNING
Injuries caused by falling parts!
Make sure that the installation complies with the standards and rules that apply in your coun-
try.
Always secure the device with a secondary safety attachment, such as a safety cable or a
safety chain.
Notice
Malfunction or damage to equipment!
Do not block the area that is needed for the pan and tilt function.
We recommend to keep an area of at least 300 mm (W) × 300 mm (D) × 400 mm (H) (11.8 in × 11.8 in ×
15.7 in) free of any objects.
The distance between light output and the illuminated surface must be more than 0.5 m (19.7 in).
Ensure also that there is enough room for ventilation.
The ambient temperature must always be below 45 °C (113 °F).
The device can be directly mounted on notinflammable construction material.
