Stahl is1+ 9475/32-04 2 Series, Руководство по эксплуатации

Страница: 46 / 55

Mounting and Installation
20
221457 / 9475621310
2019-01-18·BA00·III·en·02
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Digital Output Module 4
-
Channel Version
for Zone 1
Series 9475/32-04-.2
8.2 Mounting / Dismounting, Operating Position
8.2.1 Mounting / Dismounting
Mounting on BusRail
NOTICE
Malfunction or device damage caused by improper mounting.
Non-compliance may lead to material damage!
• Only install and operate the device in a vertical or horizontal position!
(Horizontal orientation: Reading direction from below)
05683E00
• Position the module vertically at the
intended slot of the BusRail and press
lightly to snap it into place.
• Press the module down onto the
BusRail to ensure that it is properly
secured! There should not be any gap
between the module and BusRail!
The module must not be able to
disconnect without the handle being
actuated.
• Plug the "Plant STOP" pluggable
terminals X1 and X3 into the
module and secure them against
loosening using safety screws
(tightening torque 0.5 to 0.6 Nm).
• To ensure a distance of at least 50 mm
between the intrinsically safe and
non-intrinsically safe electrical circuits,
if necessary, mount a partition
(220101) on the adjacent Ex i module
or leave a space between the Ex i and
non-Ex i modules.
BusRail
BusRail