Stahl EC-940-DUA Series, Инструкция по эксплуатации

Страница: 62 / 606

EN - English - I
nstruc
tion manual
60 MNTCMPXT_1824_EN
9.7 Configuration of the version
with MPEG4 encoder
9.7.1 Minimum system requirements
Choose one of the following configurations,
according to the number of channels to be
controlled.
PC CONFIGURATION
Channels CPU RAM HDD
16 Intel Core 2
Duo, 2.4GHz
1GB 250GB
32 Intel Core 2
Duo, 2.66GHz
2GB 250GB
49 Intel Core 2
Quad, 2.66GHz
4GB 250GB
64 Intel Core 2
Quad, 2.66GHz
4GB 250GB
Tab. 10
9.7.2 Configuration procedure through
software
After preparing and configuring the product, now
proceed with the IP settings (6.8 Connection of the
Ethernet cable, page 22).
The IP address of the various units should be
configured using a PC.
Assign the following IP address to the PC: 192.168.0.1
(or 192.168.0.2, etc.).
Connect the unit to the LAN network, provide power
supply and start the browser (minimum Microsoft
Internet Explorer® 6.0).
To set the IP address of the various units,
power them, taking care to connect them
one at a time to the LAN (switch). Configure
the unit and insert the settings for at
least the IP address and host name. Once
configured, connect the Ethernet cable and
go on to configure the next unit.
Enter address: 192.168.0.100.
At first access, enter the login and default password.
Login: Admin (written with a capital A)
Password:
123456
Fig. 114
At first access, install the OCX control to view the
video correctly. Accept installation request pop-up.
Fig. 115
The following window appears
Fig. 116