Stahl C-Lux 6102/1 Series, Руководство по эксплуатации

Страница: 5 / 37

272350 / 610260300020
2019-07-25·BA00·III·en·00
Safety
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Compact Luminaire with LED
Series C-Lux 6102/1, Series C-Lux 6109/1
3 Safety
The device has been manufactured to the state of the art while observing recognised
safety-related rules. When using the device, it is nevertheless possible for hazards to occur
to life and limb of the user or third parties or for the device, environment or material assets to
be compromised.

Use the device only
- if it is not damaged
- as intended, while remaining aware of safety and dangers
- in accordance with these operating instructions.
3.1 Intended Use
The 6102/1 and 6109/1 luminaires are intended for lighting areas, work areas and
objects, in addition to escape route marking when used with an escape route sign.
The 6109/1 luminaire can also be used as emergency lighting because it has an internal
battery. The luminaires are usable indoors and outdoors and are intended for stationary
mounting (wall or ceiling installation).
It is explosion-protected equipment certified for use in hazardous areas of Zones 1 and 2, 21
and 22, as well as in safe areas.
"Intended use" includes complying with these operating instructions and the other applicable
documents, e.g. the data sheet. All other uses are only intended after they are released by
R. STAHL.
3.2 Personnel qualification
Qualified specialist personnel are required to perform the activities described in these
operating instructions. This primarily applies to work in the following areas:
• Product selection, project engineering and modification
• Mounting/dismounting the device
• Installation
• Commissioning
• Maintenance, repair, cleaning
Specialists who perform these tasks must have a level of knowledge that meets applicable
national standards and regulations.
Additional knowledge is required for tasks in hazardous areas! R. STAHL recommends
having a level of knowledge equal to that described in the following standards:
• IEC/EN 60079-14 (Electrical installations design, selection and erection)
• IEC/EN 60079-17 (Inspection and maintenance of electrical installations)
• IEC/EN 60079-19 (Equipment repair, overhaul and reclamation)