Stahl 6402 Series, Руководство по эксплуатации

Страница: 41 / 49

225057 / 640260300010
2014-12-15·BA00·III·en·01
Mounting and installation
15
Linear Luminaire with LED
Series EXLUX 6402
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7.3 Installation
7.3.1 Opening and Closing of the Enclosure
When mounting the luminaire using top rails, ensure that the mounting
surface is flat. Otherwise, the enclosure might be mounted in a
warped/twisted way. The result is leakage of the luminaire and difficulties in
replacing the translucent cover.
For pipe clamp mounting, use the solution of R. STAHL Schaltgeräte GmbH
with integrated mounting rail providing reliable and stable four-point fixing!
In case of point suspension using pipe clamps, R. STAHL Schaltgeräte
GmbH does not guarantee the strength and tightness of the luminaire!
WARNING
Hot built-in components
Explosion protection is impaired!
• The luminaire must be allowed to cool down for at least 10 minutes
before opening it in Zone 2.
DANGER
Risk of electric shock!
Risk of fatal injuries!
• Luminaires without switch must not be opened when they are supplied
with power (see information plate on the lock)!
NOTICE
Danger due to electrostatic discharge.
Electronic components can be destroyed if touched.
• Do not touch the LED-PCBs!
Recommendation
Opening and closing of the luminaire by using a socket wrench from
R. STAHL Schaltgeräte GmbH.
15448E00
15451E00
15436E00
165°
170 90°