Stahl 6402 Series, Руководство по эксплуатации

Страница: 42 / 49

Mounting and installation
16
225057 / 640260300010
2014-12-15·BA00·III·en·01
Linear Luminaire with LED
Series EXLUX 6402
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
• Remove the closing cap of the central lock.
• Turn the central lock using a socket wrench M8, wrench size 13, by 90° to the left as
far as it will go.
• Swivel down the translucent cover.
• Proceed in reverse order to close.
• The seal of the translucent cover must lie correctly on the sealing edge.
• Push the closing cap onto the central lock opening (dust protection).
Note:
• Version without switch: Disconnect the luminaire from the power supply and secure it
against being switched on again.
• Version with switch: The luminaire is positively disconnected from the power supply by
actuating the central lock.
• In open end position and with translucent cover swivelled down, a restart lock-out de
-
vice prevents the central lock from being actuated.
Please do not use force!
When the translucent cover is closed, the central lock is released.
Opening and closing the reflector plate
7.3.2 Electrical connections
Electrical connection
Observe the maximum clamping possibility of the connecting terminals
(see chapter "Technical data").
For optional screw-type terminals, two conductors per clamping unit can be clamped
(ingoing and outgoing wiring).
Note:
• Clamping must be carried out precisely!
• Do not clamp any part of the conductor insulation!
• Do not interchange the conductors!
• Observe the technical regulations when connecting the conductor!
• Clamp the conductor firmly.
• Optional screw-type terminals: Firmly tighten screws (tightening torque 2 Nm, for
unused clamping units 0.7 Nm)!
• The terminal cover of optional screw-type terminals does not have to be removed to
clamp the conductor!
15512E00
1 Open the reflector plate by
pressing the safety latch.
2 Swivel down the reflector plate.
• When closing, flip up the reflec
-
tor plate and snap it into place.
1 2