Stahl 6402 Series, Руководство по эксплуатации

Страница: 45 / 49

225057 / 640260300010
2014-12-15·BA00·III·en·01
Maintenance and repair
19
Linear Luminaire with LED
Series EXLUX 6402
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
• the cables are correctly connected.
• the connection has been performed correctly.
• all screws and nuts are tightened according to regulations.
• the connection chamber is clean.
• the device is not damaged.
• no foreign bodies are inside the device.
• the device is sealed according to regulations.
9 Maintenance and repair
9.1 Maintenance
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Adapt inspection intervals to the operating conditions.
NOTE
Condensation
due to specific environmental and operating conditions condensation cannot be avoided
completely.
• operate the luminaire continuously or periodically over extended periods of time!
• avoid thermal bridges!
WARNING
Risk of electric shock or malfunctioning of the device due to unauthorized
work!
Non-compliance can result in severe injuries and material damage.
• Work performed on the device must only be carried out by appropriately
authorized and qualified electricians.
Observe the relevant national regulations in the country of use.
WARNING
Hot built-in components
Explosion protection is impaired!
• The luminaire must be allowed to cool down for at least 10 minutes
before opening it in Zone 2.