TECH 500 DP
3
en
1. Intended use
Congratulations on the purchase of your STABILA
measuring tool. The STABILA TECH 500 DP is a digital
measuring tool for measuring inclinations.
If you still have questions after reading through
the operating instructions, you can obtain advice
by telephone:
+49 63 46 3 09 0
Equipment and functions:
• Tough, independent digital protractor for quick and
accurate measurements
• Integrated rare-earth magnet for attachment
• Integrated V-groove for aligning on round surfaces
• Integrated T-groove for attachment
• Batteries for operation
• Carrying case
2. Safety information
• Read the safety instructions and operating instructions
through carefully.
• Keep these operating instructions in a safe place and
include them when passing the measuring tool on to
another person.
• Do not dispose of the unit with domestic waste.
Please observe the relevant national laws.
• Allow only qualified persons to operate the unit.
• Keep the unit out of the reach of children.
• Do not use in explosive or corrosive environments.
• Do not immerse the unit in water.
• If the unit is dropped or subjected to strong vibrations
it may malfunction.
• Check that the unit is functioning correctly and
accurately at regular intervals, particularly if it
has been exposed to heavy vibrations.
• Do not open the unit.
