TECH 500 DP
17
en
7.3 Adjusting the sensor
Step 5:
Turn the unit by 90°to plane 4.
Press the "CAL" button.
If the last plane has been adjusted successfully,
"rdy" is indicated in the display.
7.4 Error messages
Display: Cal. /temperature
The sensor must be adjusted if the temperature or Cal.
symbols are indicated in the display.
Display: Err
The unit must not be moved or subjected to vibrations
during the calibration/sensor adjustment. This can lead
to measurement errors.
Display: - - - -
Unit inclination around longitudinal axis > 10°
5
