TECH 500 DP
9
en
6.4 Setting the MODE unit of measurement
6.5 Locking the measurement with HOLD
The unit of measurement is set by pressing the "MODE"
button several times.
° Fine:
Display in 0.01°
steps
° Rough:
Display in 0.1°
steps
%:
Display in 0.1 %
steps
mm/m:
Display in 1 mm/m steps
in/ft decimal:
Display in 0.01 in/ft steps
in/ft fraction:
Display in 1/8 in/ft steps
The set unit of measurement is retained after the unit is
switched off.
The current measurement can be locked by pressing the
"HOLD" button. The visual guidance indicator flashes.
The measurement is displayed continuously.
The locked measurement is deleted by pressing the "HOLD"
button again or switching the unit off.
0,1˚
MODE
0,01°
