ST Group ST 100 Скачать руководство пользователя страница 41

Страница: 41 / 61

RECOMMENDATION FOR USE

In fig.36

User actions

Indication

Interpretation

Turn on the
LOCALIZATION mode

The received signal level is taken as "0".

Move the device to the
center of the room

The current signal level has increased
compared to the level at point #1

The device is
approaching the signal
source

Move the device to one
of the corners of the
room

The current signal level has decreased
compared to the levels at point #2 and
at point #1 (displayed in blue)

The signal level is less
than "0". The device
moves away from the
signal source

Move the device to an
adjacent corner

Signal level is higher than at points #1
and #3, but lower than at point 2

The device is
approaching the signal
source

Move the device along
the wall towards the
center of the room

Signal level higher than any previously
checked point

The device is
approaching the signal
source

Move the device in the
direction of increasing
signal strength

Highest signal level

The device is
approaching the signal
source

Move the device along
the wall from point #6

Signal level is lower than point #6

The device moves away
from the signal source

The maximum signal level was fixed at point #6. Further searches should be continued at this

point with the SIGNAL ANALYSIS AT A FIXED FREQUENCY function (in this case at 433 MHz) by
decreasing the gain value and using the SETTING "0" function.

8.2. RECOMMENDATIONS FOR USING SELECTED RANGES CHANNEL

The SELECTED RANGES channel analyzes ranges that conform to digital communication

standards and user-defined ranges.

Preset settings

MOBILE DEVICES

Frequency range, MHz

CDMA450

453 - 458

GSM900

899,5 - 915

GSM1800

1710 - 1785

1920 - 1980

3G low

2010 - 2025

DECT

1880 - 1900

WiFi/BT

2400 - 2480

4G/LTE

2500 - 2700

WiFi 5

5200 - 5800

BASE STATIONS

Frequency range, MHz

CDMA450

463 - 468

GSM900

935 - 960

Содержание ST 100






























































Результаты поиска

Содержание ST 100

Отзывы:

Похожие инструкции для ST 100

Бренды по названию

Популярные бренды

ST Group ST 100, Руководство пользователя

Результаты поиска

Содержание ST 100

Отзывы:

Похожие инструкции для ST 100

Бренды по названию

Популярные бренды