ST Group ST 100, Руководство пользователя

Страница: 39 / 61

RECOMMENDATION FOR USE
38
Fig.34
INTERPRETATION OF DEVICE READINGS IN THE LOCALIZATION MODE
In the LOCALIZATION mode, the energy method is used (analysis of the change in the level of
the detected signal when the device is moved around the tested room).
After turning on the mode and scanning the entire range, a table (Fig.17) with information
about the detected signals is displayed on the screen, which displays their serial numbers,
frequencies and siugnal levels (in graphical form).
Signal levels fixed when the device is turned on are taken as "0" (as in the DIFFERENTIAL
mode). When the device move around the room, the signal levels will change depending on the
distance to their sources.
The level of one of the detected signals at different positions of the device relative to its source
is shown in Fig.35.
Fig.35